Casting

Casting is a manufacturing process by which a liquid material such as a suspension of minerals as used in ceramics or molten metal or plastic is introduced into a mould, allowed to solidify within the mould, and then ejected or broken out to make a fabricated part. more...

Home
Airsoft
Camping, Hiking, Backpacking
Cycling
Exercise & Fitness
Fishing
Apparel & Footwear
Decals
Downrigger, Outrigger Gear
Fishfinders
Fly Fishing
Freshwater
Baits & Lures
Crankbaits
Crankbaits Bagley
Crankbaits Bomber
Crankbaits Other
Crankbaits Rapala
Crankbaits Rebel
Crankbaits Yo-Zuri
Jigs
Other Baits & Lures
Soft Plastics
Spinnerbaits
Spoons
Topwater
Fishing Line
Other Freshwater Items
Reels
Baitcasting
Casting
Other Reels
Spincasting
Spinning
Rod & Reel Combos
Casting
Other
Spinning
Rods
Casting
Other Rods
Spinning
Signs, Prints, Art
Videos, Books
Ice Fishing
Other
Rod Building & Repair
Saltwater
Tackle Boxes
Terminal Tackle
Vintage
Golf
Hunting
Paintball
Skiing & Snowboarding

Casting is used for making parts of complex shape that would be difficult or uneconomical to make by other methods, such as cutting from solid material.

Casting may be used to form hot, liquid metals or meltable plastics (called thermoplastic), or various materials that cold set after mixing of components such as certain plastic resins such as epoxy, water setting materials such as concrete or plaster, and materials that become liquid or paste when moist such as clay, which when dry enough to be rigid is removed from the mold, further dried, and fired in a kiln or furnace.

Substitution is always a factor in deciding whether other techniques should be used instead of casting. Alternatives include parts that can be stamped out on a punch press or deep-drawn, forged, items that can be manufactured by extrusion or by cold-bending, and parts that can be made from highly active metals.

The casting process is subdivided into two distinct subgroups: expendable and nonexpendable mold casting.

Expendable mold casting

Expendable mold casting is a generic classification that includes sand, plastic, shell, plaster, and investment (lost-wax technique) moldings. This method of mold casting involves the use of temporary, nonreusable molds.

Waste molding of plaster

A durable plaster intermediate is often used as a stage toward the production of a bronze sculpture or as a pointing guide for the creation of a carved stone. With the completion of a plaster the work is more durable (if stored indoors) than a clay original which must be kept moist to avoid cracking. With the low cost plaster at hand the expensive work of bronze casting or stone carving may be deferred until a prosperous patron is found, and as such work is considered to be a technical, rather than artistic processes it may even be deferred beyond the lifetime of the artist.

In waste molding a simple and thin plaster mold, reinforced by sisal or burlap, is cast over the original clay mixture. When cured it is then removed from the damp clay, incidentally destroying the fine details in undercuts present in the clay, but which are now captured in the mold. The mold may then at any later time (but only once) be used to cast a plaster positive image, identical to the original clay. The surface of this "plaster" may be further refined and may be painted and waxed to resemble a finished bronze casting.

Sand casting

Sand casting is one of the most popular and simplest types of casting that has been used for centuries. Sand casting allows for smaller batches to be made compared to permant mold casting and a very reasonable cost. Not only does this method allow for manufacturers to create products for a good cost there are other benefits to sand casting such as there are very little size operations. From castings that fit in the palm of your hand to train beds (one casting can create the entire bed for one rail car) it can be done with sand casting. Sand casting also allows for most metals to be cast depending in the the type of sand used for the molds.

Read more at Wikipedia.org